ASTM B163

Reliable Steel Distributors is one of the Biggest Manufacturer  Stockist,  Supplier, Trader
With a Large Inventory of:-

ASTM B163 (STANDARD SPECIFICATION FOR SEAMLESS NICKEL AND NICKEL ALLOY CONDENSER AND HEAT-EXCHANGER TUBES)

Scope:- This specification covers seamless tubes of nickel and nickel alloys, as shown in table 1, for use in condenser and heat-exchanger service.

This specification covers outside diameter and average wall, or outside diameter and average wall, or outside diameter and minimum wall tube.

The size covered by this specification are 3 in. (76.2mm) and under in outside diameter with minimum wall thicknesses of 0.165 in. (4.19mm) and under.

Tube shall be furnished in the alloys and conditions as shown in table 2. for small diameter and light wall tube (converter sizes), see appendix X2

ASTM B163 UNS N02200 ASTM B163 UNS N06603
ASTM B163 UNS N02201 ASTM B163 UNS N06696
ASTM B163 UNS N04400 ASTM B163 UNS N06686
ASTM B163 UNS N06600 ASTM B163 UNS N08120
ASTM B163 UNS N06601 ASTM B163 UNS N08800
ASTM B163 UNS N06690 ASTM B163 UNS N08810
ASTM B163 UNS N06025 ASTM B163 UNS N08801
ASTM B163 UNS N06045 ASTM B163 UNS N08825

 

ASTM Standard

ASTM B163 (Nickel 200 / Nickel 201 / UNS N02200 / UNS N02201 ASTM B 407 ASTM B514  ASTM B 515  ASTM B 535  ASTM B710  ASTM B675 ASTM B676  ASTM B690  ASTM B423  ASTM B673  ASTM B674  ASTM B677
Ni-Mo Alloys
UNS N10001
Ni-cr-fe-mo-cu alloys-n06007
UNS N06059
UNS N10665
N06030
Low c-ni-cr-mo-cu alloy n06200
UNS N10675
Ni-Mo-Cr-Fe Alloy-N10242
Low c-ni-fe-cr-mo-cu alloy n08031
UNS N10629
Low C Ni Cr-Mo Alloys N10276
Low c-ni-cr-mo-w alloy n06686
UNS N06022
Ni-fe-cr-mo alloys n08320
Ni-co-cr-si alloy n12160
UNS N06035
Ni-cr-mo-fe alloy n06002
Cr-ni-fe-n alloy r20033
UNS N06455
Ni-fe-cr-co alloy r30556
Low c-ni-mo-cr-ta alloy n06210
UNS N06975
Ni-cr-w-mo alloy n06230
UNS N06985
Low c-ni-cr-mo alloy n06058

 

Origin

imports & stocks material from :

Europe, Japan, USA, South Africa, Korea, India, Germany, China, Taiwan, Turkey, Ukraine.

Supplementary Requiremnets

NACE MR0175, MR0103 / ISO 3183 / NACE TM0284, HIC & SSC TESTED PIPES.

Delivery Condition

As Rolled, Normalized, Thermomechanical Rolled / Formed, Normalized & Tempered, Quenched & Tempered, Annealed, Stress Relieved.

Speciality

As Rolled, Normalized, Thermomechanical Rolled / Formed, Normalized & Tempered, Quenched & Tempered, Annealed, Stress Relieved.